☰ Menu
Researched#2 Best for Hive homes

Hive Radiator Valves

Hive Radiator Valve (single) · RRP £59 when researched on 5 November 2026 (may have changed — see the shop prices below)

No link on this page earns COMANORA any money. How we're funded

Our verdict

A widely compatible valve for Hive homes with good adapter coverage. It needs a Hive Hub, and works best with Hive's own thermostat.

Best for: Homes already using Hive.

Will it work in my home?

Combi boilerSystem boilerRegular boilerHeat pump (check)OpenThermNo neutral wire neededRenter-friendly

Needs an existing TRV body on each radiator. Adapters included: M30, M28 and Danfoss RA; others available free from Hive. Not compatible with electric heating or older on/off valves. Works with or without a Hive thermostat; with Hive Active Heating the valves can call for heat.

Not sure? Run the boiler checker →
You will also need:
  • Hive Hub (current Hive Hub or Hub 360; Hub 1 not supported) (£80). Hive adds £80 at checkout if you don't already have a compatible hub.

Where to buy

  • Hive shop £59 · ViewIn stock · delivery: free over £100; fee below not stated · price from manufacturer's own shop, checked 6 Nov 2026, 16:50

Prices as shown by the shop to UK consumers, normally including VAT. Prices can change. Delivery is the shop's stated standard UK charge for this item ordered on its own. Sorted by price, not commission. None of these links earn COMANORA money.

How we assessed this:researched from manufacturer documentation, installation manuals and UK pricing. Not hands-on tested. Our method

Key facts

Manufacturer's RRP (researched 5 November 2026)£59
SubscriptionNone
Upfront cost if you need everything listed (at RRP and listed prices, researched 5 November 2026)£139 (product + Hive Hub)
3-year cost (RRP + required subscription, researched 5 November 2026)£59 plus required extras listed above
Powerbattery
InstallationDIY
Works withNot stated on the official product page
Batteries2 × AA alkaline (avoid lithium and rechargeable)
AdaptersM30, M28, Danfoss RA
ConnectivityZigbee via Hive Hub
Weight134 g (without batteries/adapter)
Warranty1 year (ongoing with Hive+)

Features

  • Works with or without a Hive thermostat
  • Heat on Demand with Hive Active Heating
  • Open-window detection with Hive Window Sensors
  • Child lock
  • 2 × AA batteries included

Pros and cons

  • Three adapters included, more free from Hive
  • Works with or without a Hive thermostat
  • Lower price than tado° X per valve
  • Requires a Hive Hub (not the original Hub 1)
  • Calling for heat needs Hive Active Heating
  • Open-window detection needs extra sensors

Installation: what UK buyers need to know

Needs an existing TRV body on each radiator. Adapters included: M30, M28 and Danfoss RA; others available free from Hive. Not compatible with electric heating or older on/off valves. Works with or without a Hive thermostat; with Hive Active Heating the valves can call for heat. If you are not confident with the wiring, use a qualified installer. Any work on the gas side of a boiler must be done by a Gas Safe registered engineer.

Alternatives

tado° vs Hive vs Wiser smart radiator thermostats

Head-to-head comparison

Netatmo Additional Smart Radiator Valve

Adding room control to an existing Netatmo system.

tado° Smart Radiator Thermostat X

Adding room-by-room control to a tado° X system.

tado° Wireless Temperature Sensor X (2nd gen)

Rooms where the radiator thermostat reads warmer than the room.

Sources